Log in

View Full Version : Tuning the Gen 3 Coyote??



mkassab
01-20-2025, 08:58 AM
Help/advice needed for Tuning my Gen 3 Ford Performance Coyote crate engine ECU. My build link is in my signature below.

Since I had to remove the stock CMCV parts, along with headers, Cold Air Intake, etc, I'll need to tune the ECU. I don't have anyone local and I'm trying to have it all done online via an OBC-II plug in device, downloading engine data to send to the tuner and then uploading the new tune to the ECU.

Any advice/help would be most welcome.

Thanks Mark

nuhale
01-20-2025, 10:45 AM
Lund

Railroad
01-20-2025, 11:47 AM
Lund has tuned 3 of my Ford vehicles. They can tune the vehicle, but seldom are able to diagnose or help with any issues. Fortunately, my issues were very minor and I was able to get advise on the cause and correction.
This is not to say, don't use Lund, just know where their job stops.
good luck,

jiriza84641
03-01-2025, 01:59 PM
I also say LUND, I performed a remote tune, sent data to LUND. via email a few times, and LUND sent back final tune, that I still use today. I might just email them back and have them lower my idle RPM just so that it's not so loud. A sign I am getting older!

edwardb
03-01-2025, 02:23 PM
X whatever on Lund. I've used the three times. All good.