View Full Version : MS3Pro Mini and Infinitybox 20 Circuit Harness
hronald395
11-15-2024, 12:22 PM
I’ve purchased a MS3 Pro Mini ECU for my project. The engine is a 2007 JDM Forester 2.5 Liter Turbo SG-9. Also using a 5 speed transmission. Does anyone know where I might find the pin diagram for the main connector on the oem engine harness.
Ajzride
11-15-2024, 01:30 PM
Did you try nasioc.com? I only have a 2006 Pin-out which might not work.
blomb11
11-15-2024, 03:34 PM
Your best bet is to try and find the Factory Service Manual (FSM) for that car or engine. You can find the USDM FSMs online but the JDM one might be a little more challenging. The NASIOC or wrx/sti forums is a good idea too.
Bob_n_Cincy
11-15-2024, 06:06 PM
I’ve purchased a MS3 Pro Mini ECU for my project. The engine is a 2007 JDM Forester 2.5 Liter Turbo SG-9. Also using a 5 speed transmission. Does anyone know where I might find the pin diagram for the main connector on the oem engine harness.
These are the schematics for a US 04 & 05 forester xt. Could you check the pin numbers and color code to see if it matches your engine?
Bob
https://1drv.ms/b/c/b1afde2c10c76e07/EfUh6ClVTKhMsvQ1LACvtlABkosv2LH2d3h5kCOuSlLfjA?e=g taq2g
hronald395
11-17-2024, 01:39 PM
I’ll check it out.
hronald395
11-17-2024, 01:41 PM
Am trying NASIOC and Alldata.com.