View Full Version : Need a new Dash
maginter
10-11-2024, 10:10 AM
Hi -
I have a Cobra MK1 and need to replace the dash. Will this one fit in the MK1?
#11194 - Mk3 & Mk4 Blank Dash
https://www.factoryfiveparts.com/11194-mk3-mk4-blank-dash/
65 Cobra Dude
10-11-2024, 11:25 AM
No, you need the MK1 dash. Steering shaft comes out in a different place.
Henry
herb427sc
10-11-2024, 01:13 PM
Buy a piece of aluminum and make your own.
I do have a MKI dash that uses the Mustang gages that I never used.
Absolutely make your own dash! On my '33 Hot Rod, I just made a template from the original fiberglass dash and fabricated my own aluminum dash, plus it gave me a good excuse to try my hand at engine turning. I have a total of $30 into this dash, plus it was a lot of fun. The dash is now the most complimented item on my car at gatherings and shows. This could also be painted, covered with a wrap or vinyl.
205159205160205161205162205163
maginter
10-12-2024, 09:49 AM
Buy a piece of aluminum and make your own.
I do have a MKI dash that uses the Mustang gages that I never used.
I'd be curious to see what you have.
herb427sc
10-13-2024, 09:17 AM
I'd be curious to see what you have.
205221205222205223
That FFR dash would not work for me because I have a Flaming River Tilt steering column.
maginter
10-13-2024, 10:12 AM
205221205222205223
That FFR dash would not work for me because I have a Flaming River Tilt steering column.
I will follow up in a PM