PDA

View Full Version : IRS Suspension Clearance



nashuanuke
09-09-2024, 04:59 AM
I've done a poor man's alignment on my IRS until I can get it to a shop. Slightly toe'd in and negative camber, but the clearance for the rear suspension is really close, is that normal?

Trying to upload a photo but not having any luck, I'll upload when able. But's less than a finger width from the tire to the spring.

nashuanuke
09-09-2024, 07:38 AM
203853
Apparently Microsoft Edge and the forum don't work well together

kirby
09-09-2024, 12:33 PM
I have not had mine aligned but the clearances are very tight on mine also

edwardb
09-09-2024, 02:51 PM
Many have reported tight clearance or even interference in that area. Mainly before alignment. You should be OK after it's accurately aligned. Not to worry... ;)

nashuanuke
09-10-2024, 05:42 AM
Thanks everyone, I'll proceed forward.