View Full Version : Rear Hatch Question
icoulabeenav8
08-22-2024, 04:53 PM
My original builder never install the hatch cable assy, instead leaving it coiled up for me inside the frame. Looking at the manual(s), it is not clear the exact location of the release lever or the piece of sheet metal it is attached to. Does anyone have photos of the stock location and the p/n of the sheet metal it is attached to?
VRaptor SpeedWorks, LLC
08-23-2024, 08:38 AM
203029
25920 appears to be the FFR part number. Located right behind the driver's door.
icoulabeenav8
08-24-2024, 03:11 PM
Thanks for the reply, apparently, I will be trying to get it from FF.
beeman
08-24-2024, 10:39 PM
You're probably better off just fabricating one out of 040 based on Shane's photo.
icoulabeenav8
08-26-2024, 02:18 AM
It looks like it has a flange in the curve like the nose of a wing rib. A lengthy process.
VRaptor SpeedWorks, LLC
08-26-2024, 08:40 AM
I may already have these drawn up in CAD and could CNC cut it for you if FFR can't provide one to you.
VRaptor SpeedWorks, LLC
08-26-2024, 08:43 AM
We round over the leading edge for a better look and fit/seal using some really high-tech tooling.....a plastic mallet and a 2x4 block of wood. ;)
beeman
08-26-2024, 01:02 PM
It looks like it has a flange in the curve like the nose of a wing rib. A lengthy process.
FFR has never shipped a piece of aluminum that required more than a brake to bend. They don't have complex dies or English wheels.