twatson799
08-09-2024, 09:54 PM
I wanted to have a hydraulic clutch for my TKO600 and bought the setup from Mike Forte. It comes with a Wilwood master cylinder and I needed to find a way to make it work with the SN95 pedalbox. I got inspiration (and support) from https://thefactoryfiveforum.com/member.php?418-Chepsk8. I wanted the primary support for the MC to be the pedalbox housing to retain the crushability of the 2 steel tubes that parallel the steering shaft in case of an accident. I used 2” angle iron for rigidity and strength. I do not have the engine/trans in yet so it will be some time before I can verify everything works good. I am interested in any tips to make it better.