FE motor install?

[CDJ]

Working to install an FE using FFR supplied motor mounts. I know several have done this. It is not at all clear which mount is right and which is left and there is no documentation with these details, but they are not identical so there is certainly a “correct” R/L. I’ve mocked it up both ways and there is little difference and either configuration leaves very little steering shaft to header clearance (well under 3/8”).

Has anyone done this and have pictures or suggestions? Is there a better motor mount solution?

[Ducky2009]

I build mine on 2017, but, if their still the same.... Look at the small pin on the mount. Look at the large bolt slot on the frame and see which side (front or back) the small pin slot is on.