Speedhut Gauges

[RogerRoger88]

I am planning for my kit to arrive in August, and I am going with gauges from Speedhut and noticed that you can add a logo to the faces. Has anyone done this through Speedhut? Just curious how it looked. I was thinking about adding one of the Cobra emblems in the background on some or all of the gauges. (I need to get my post count up so I can post pics.)

Thanks!

[David Hodgkins]

../I need to get my post count up so I can post pics.)

Thanks!

… or the admin notices and upgrades you right away.

You’re good to go!

:)

[RogerRoger88]

Awesome! Thanks David!

Here is what the gauge would look like:

200786

[PG_Cobra]

I added text, no logo. Must have been over 15 years ago!

[RogerRoger88]

I added text, no logo. Must have been over 15 years ago!

Those still look good!

[CaptB]

200945

[cv2065]

Speedhut will assign a designer that will work with you and send proofs with changes until you are satisfied. You can also provide your own logo, graphic, colors, or pretty much anything you want to do, just have to be sure that it is 'printable' quality, which they will show you in proof. Great service that they provide. Only caveat is that you can't remove the Speedhut logo in your custom design, but no biggie. Here's what I did.

https://hosting.photobucket.com/images/c310/cv2065/(edited)_IMG_9346.png?width=960&height=720&fit=bounds (https://hosting.photobucket.com/images/c310/cv2065/(edited)_IMG_9346.png?width=960&height=720&fit=bounds)

[gbranham]

Wonder how they get away with reprinting copyrighted and/or trademarked logos for profit?

[BEAR-AvHistory]

These are mine snake logo, white on black numbers in a font I selected including needle color & style, blue night lightning with red needles. Their service is pretty good.

https://thefactoryfiveforum.com/attachment.php?attachmentid=188023&d=1690737057

Daytime

https://g80.bimmerpost.com/forums/picture.php?albumid=23197&pictureid=102307

Nighttime

[CaptB]

Wonder how they get away with reprinting copyrighted and/or trademarked logos for profit?

If you look close they only have one eye instead of 2 on the Cobra.

;-)

[Jeff Kleiner]

https://hosting.photobucket.com/images/c310/cv2065/(edited)_IMG_9346.png?width=960&height=720&fit=bounds (https://hosting.photobucket.com/images/c310/cv2065/(edited)_IMG_9346.png?width=960&height=720&fit=bounds)

They couldn't make them all the same color? ;)

Jeff

[cv2065]

They couldn't make them all the same color? ;)

Jeff

LOL. I'm going to have to reach out and see what happened there Jeff!

[Etraugott]

Where did you source the black buttons. That looks like the route im going to go.

[cv2065]

Where did you source the black buttons. That looks like the route im going to go.

https://billetautomotivebuttons.com/

[Mat1asBEV&ICE]

https://billetautomotivebuttons.com/
Did you use something like this (https://a.co/d/01oDf4KR) to connect the buttons to the dash harness?

[gbranham]

If you look close they only have one eye instead of 2 on the Cobra.

;-)

How about the Roush logo?

[cv2065]

Did you use something like this (https://a.co/d/01oDf4KR) to connect the buttons to the dash harness?

Haven't wired it up yet, but thinking something like this. Not an expert here, but thinking I'd have to daisy chain them together using this harness and associated relay.

https://www.amazon.com/dp/B0748F1JK4/ref=sspa_dk_detail_5?pd_rd_i=B0748F1JK4&pd_rd_w=WJbyD&content-id=amzn1.sym.8c2f9165-8e93-42a1-8313-73d3809141a2&pf_rd_p=8c2f9165-8e93-42a1-8313-73d3809141a2&pf_rd_r=G6SW30FM7KHVJEGZRS0F&pd_rd_wg=31YUq&pd_rd_r=fe37eb19-7171-430c-9637-962aa7cb5a1f&s=industrial&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw&th=1

[cv2065]

How about the Roush logo?

I just downloaded a high res version of the logo from one of the logo sites and sent it over. They didn't have any issues with it.

[ADI]

Haven't wired it up yet, but thinking something like this. Not an expert here, but thinking I'd have to daisy chain them together using this harness and associated relay.

https://www.amazon.com/dp/B0748F1JK4/ref=sspa_dk_detail_5?pd_rd_i=B0748F1JK4&pd_rd_w=WJbyD&content-id=amzn1.sym.8c2f9165-8e93-42a1-8313-73d3809141a2&pf_rd_p=8c2f9165-8e93-42a1-8313-73d3809141a2&pf_rd_r=G6SW30FM7KHVJEGZRS0F&pd_rd_wg=31YUq&pd_rd_r=fe37eb19-7171-430c-9637-962aa7cb5a1f&s=industrial&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw&th=1

This is how I did mine:

https://thefactoryfiveforum.com/attachment.php?attachmentid=165683&d=1650376796

I glued some cable grippers and route them tight using zipties