Gen 2 Coyote Air Intake Tube Support

[cdurbin328]

Question for you Coyote guys...
Did you use any kind of support on the air intake tube?
It seems a little "floppy" when unsupported. I was thinking of designing something but it might just be a waste of time.
Thoughts?

Thanks!

200357

[Al_C]

I fabricated a bracket to support the tube/air filter from below. It's basically an elongated "U" shape, with one end bolted to the frame and the other slips under the clamp holding the air filter. Works great. Ignore the dirty filter. It's time for a replacement...

https://thefactoryfiveforum.com/attachment.php?attachmentid=200358&d=1717680690

This is to show the basic location of the frame mount.


https://thefactoryfiveforum.com/attachment.php?attachmentid=200359&d=1717680690

Here's the basic shape of the bracket. It's powder coated steel.

[cdurbin328]

[QUOTE=Al_C;556869]I fabricated a bracket to support the tube/air filter from below. It's basically an elongated "U" shape, with one end bolted to the frame and the other slips under the clamp holding the air filter. Works great. Ignore the dirty filter. It's time for a replacement...

https://thefactoryfiveforum.com/attachment.php?attachmentid=200358&d=1717680690

This is to show the basic location of the frame mount.


https://thefactoryfiveforum.com/attachment.php?attachmentid=200359&d=1717680690

Here's the basic shape of the bracket. It's powder coated steel.[/QUOTE

Thanks for the info!
I thought maybe I was the only one who didn't like the air filter flopping around.. lol

[Ducky2009]

I added a support bracket also.

200360 200361 200362