Fat Larry’s Garage Missing Parts

[Fat Larrys Garage]

So I thought when I purchased the Thunder Valley Racing Kit with the Coyote Engine and the T 56 trans I would get all I needed to put everything together now it could be just a box missing but no flywheel bolts no flywheel pins no clutch to flywheel mounting bolts no bell housing to engine bolts no pilot bearing etc. Maybe someone else here purchased the same kit and could shed some light I also have a question on the clutch safety switch does the new kit use the same switch as the brake light switch because I have two of the same switch and mounting tab end would make sense to me this would work and just use the two rear terminals

[Fat Larrys Garage]

Just for future reference anyone ordering a Thunder Valley Racing Coyote Engine and T-56 Trans kit make sure you read the Factory Five Installation kit manual. I did not realize some of the most important hardware does not come in the kit so just a heads up.

[mrglaeser]

I totally get your frustration. I've had many a weeks delays looking for hardware I thought would come with something. In fact my transmission to bellhousing bolts are currently in the mail.

[RoadRacer]

On the 33, it’s the same safety switch for both. I’d imagine the pedal box etc are the same between kits but I don’t know that for a fact!

[Lidodrip]

The Ford Performance Control Pack includes the clutch safety switch which you use instead of the one supplied by FFR. https://www.trackey.ford.com/part/M-6017-M50B

James

[Fat Larrys Garage]

So I didn’t realize how tight this engine was to get in the engine bay as long as you take your time it will eventually slide in place