Door Threshold and Side Carpet Trim Options

[mlewis]

All,

Doing the final interior install (finally)…

Looking for some options/suggestion to clean up the door threshold area and the outside corner areas next to the door.

Any/all suggestions are appreciated.

Mark

[michael everson]

I make it out of a single piece. only thing left will be a small triangle are that will need to be filled at the bottom of the "v" FFR sells the carpet by the foot.
Mike

[egchewy79]

197221197222197223197224

[RJD]

This stair edge worked pretty good.

197225197226

[Higgybulin]

I use the same as Chewy, you can get it in 3/4 or 1"
https://www.homedepot.com/p/Alexandria-Moulding-AT-008-3-4-in-D-x-3-4-in-W-x-96-in-L-Metal-Mira-Black-Outside-Corner-Moulding-AT008-AM096C01/205576693

[mlewis]

Thanks all. This was the direction is was thinking about going. I will look into some trim options.

Any other creative options/suggestions for the body to interior transition?

[RJD]

Thanks all. This was the direction is was thinking about going. I will look into some trim options.

Any other creative options/suggestions for the body to interior transition?

I used some textured 1/8" ABS plastic to clean up the locking post area. Easy to cut to fit and then bend around the corner with a heat gun.

197232

[Al_C]

197221197222197223197224

I did the same thing, only mine is plastic. I like Chewy's better. The plastic breaks eventually.

[egchewy79]

I got black anodized aluminum from online metals dot com. Blends in with the carpet better

[egchewy79]

Thanks all. This was the direction is was thinking about going. I will look into some trim options.

Any other creative options/suggestions for the body to interior transition?

are you talking about the under door part of the body? most use that C channel trim piece to hide the transition. Dark water customs made a polished aluminum trim piece, but I think Chris is no longer making products. I actually had my hands on a pair of these transition pieces but sold them as it required some shaping to fit correctly and I didn't want to mess with it on a freshly painted car.

[mlewis]

Yes, that is the area and the kind of option I am looking for (I recalled see the dark water option but couldn’t find it)

Any other options out there ??

[egchewy79]

Yes, that is the area and the kind of option I am looking for (I recalled see the dark water option but couldn’t find it)

Any other options out there ??

unfortunately, I don't think so.
just checked DWCs website and it's confirmed that he's shutting down operations and is no longer a vendor.