Where can I find “secondary chassis components box”?

[Mat1asBEV&ICE]

I want to attach the Willwood pedal box to the frame but I can’t find the four 3/8” x 1” button head screws. The manual says I need “Unpack the pedal box hardware from the secondary chassis components box.” Where is that? Can’t find the two 1/4” x 1.5” that hold the rear foot pedal bracket either. Neither of these screws is listed in the inventory for box 19, where the foot pedals, gas pedal, and e-brake are located.

These screws are not in the “fastener box” inside Box 1.

Thank you.

[jklapp]

I think both are in box 19...I don't see 1.5" bolts in any box, just 1.25". You can PM me if you want a copy of my excel file (can't figure out how to upload).

Box Part No Description Quantity Unit Part Group
19 16919 PEDAL COMPONENTS 1 EA 16919
19 16665 3/8"-16 x 1" BUTTON HEAD 2 EA 16919

19 16920 CLUTCH QUADRANT & CABLE 1 EA 16920
19 15638 1/4"-20 X 1.25" BOLT 2 EA 16920

[Mat1asBEV&ICE]

Thank you. FF said they're supposed to be in Box 4 but there are no fasteners in that box.:confused:

[jklapp]

Box 4 does list:
4 17135 SECONDARY CHASSIS PARTS 1 17135
4 11029 INSULATED CLIP HARDWARE 1 17135

But doesn't make sense to find them there. I don't see any fasteners in my box 4.

[gbranham]

My 'Secondary Body Fasteners' are in Box 4, but the 3/8"x1 and 1/4" x 1.25" were both in my Box 19. I've found that I have to make occasional runs to the hardware store, because a bolt is missing here or there, or maybe I used it elsewhere. Get used to that. ;)

194660194661

[Mat1asBEV&ICE]

Thank you. I don't mind getting a bolt/screw here or there but I am missing the entire "secondary body fasteners" box. I sent FFR an email to see what else I am missing.

[michael everson]

All or most of the hardware are now in a separate box. Its up to you to wade through it and find what you need. Don't know what the box number is.
Mike

[Mike(Ontario)]

I am having this exact issue! I know this thread goes back a bit, but did you solve this issue? Did you figure out where those bolts/nuts are to secure the pedal box to the frame. I too can't find them in box 19 or otherwise.

[Mat1asBEV&ICE]

I don't remember exactly where I found them, but what I decided to do was use fasteners (of the correct size, pitch, length) no matter which box I found them in. I did end up having to purchase some fasteners on my own because they were missing.

Wished FFR did a better job of supplying all necessary fasteners and nuts.

Sorry, I know that's not a concrete solution for you.