E Cable

[JimiD]

Hi All,
Running my E brake cables on my IRS setup and my calipers are on the rear side of my rotors (picture in manual, wrong?). It looks like there will be contact with my axle. Does anyone have pictures of how they routed their cables on an IRS setup?

thanks

Jim

[John4337]

I ran mine along the LCA's. The passenger side comes over the CV shaft, the driver's side is in front. Looks like everything clears.....

http://i1203.photobucket.com/albums/bb391/JOhn4337/8790ce95.jpg

http://i1203.photobucket.com/albums/bb391/JOhn4337/799586aa.jpg

Hope this helps

John

[JimiD]

Thanks John,
That's what I came up with too; I just don't like the angle it leaves the caliper at. Too close to the moving parts but i'm still on floor stands maybe it will change at ride height.

thanks again

[John4337]

I agree, the angle looks a little severe, but I messed around for a long time and that was the only way I could get it to come together. Mine's still on jack stands too, although hopefully not for long.

J

[JimiD]

i read your post about the handle, i had the same problem i gently pursuaded/removed some of the aluminum.

[John4337]

Thanks Jimi, I'm working on that idea too.