Seat Locating Question

[F500guy]

I plan on using Esparco slider on driver side and maybe passenger side just to make thinks equal. Can that work be done and floor board drilling completed prior to body fitting, seems so much easier that way and any tips either way for locating them.

Lance

[Jeff Kleiner]

You’re really better off to wait until the body is on to locate the seats. Even the low backs can conflict with the rear cockpit outside corners and door latches, especially when sliders which raise the seats come into play.

Jeff

[cdurbin328]

You’re really better off to wait until the body is on to locate the seats. Even the low backs can conflict with the rear cockpit outside corners and door latches, especially when sliders which raise the seats come into play.

Jeff

Totally agree with Jeff.
I made that mistake and ended up having to move the driver seat due to interference issues with the the door latch, etc

[F500guy]

Thanks, I will probably hold off on the floor covering then until after the seats are drilled.