IRS "misalignment spacer"

[Rock2000]

I'm not sure if this is another case of the instructions being out of date. I'm assembling my IRS and I went to grab the upper control arm parts. I have the "angled mount adapter" pictured, but the other spacers in that bad are just simple spacers. Nothing fancy like pictured. I initially assumed it would work, as they are generally the right depth to fill the rest of the rod end. But after tightening it down I realize I at least need another spacer to push the bolt head and washer away from the arm a bit, so it can angle correctly. Seems like a simple spacer like this would have worked, but it needs to be like twice the depth it is. So I guess the main question is, should the 'misalignment spacers' still be included as pictured and I just didn't get the right ones?

Thanks
Rock

[Indy Shu]

yes, you should have both pieces as shown.