Hydraulic clutch lines

[DesertSn8ke]

So for making hydraulic clutch lines, the standard PTFE/olive style fittings that are used for fuel systems are not suitable for hydraulic lines correct? I was originally thinking I could make my own. But after a bit of reading it seems the answer there is no. I don't see pre-made ones in the length/configuration I'm wanting. Any recommendations for somewhere to get custom crimped ones made?

[Jryasko]

You need to use AN fittings which are 37 degree. Pegasus Auto Racing in Wisconsin is a good source of lines. They have premade stock lengths or will custom make a line for you.

[GoDadGo]

I plumbed a hard line from the MC to the trans tunnel and found the braided line that I needed at Speedway Motors.

https://www.speedwaymotors.com/Search?query=braded%20brake%20lines%20

The adapters to make it all work came from my local NAPA and O'Reilly auto parts stores.

Hope This Helps & Good Luck!

[Dgc333]

I plumbed a hard line from the MC to the trans tunnel and found the braided line that I needed at Speedway Motors.

https://www.speedwaymotors.com/Search?query=braded%20brake%20lines%20

The adapters to make it all work came from my local NAPA and O'Reilly auto parts stores.

Hope This Helps & Good Luck!

I did the same thing except I ordered the adapters from Speedway at the time I ordered the braided line.