IRS Center Section Front Bolts/Sleeves

[cv2065]

Installed the bushing with sleeves and test fitting the bolts. The rears are fine but the 130mm (5") front bolts are not wanting to slide through the metal sleeve even with hand force and twisting. Anyone have the same issues before I give it a tap. Thanks.

*Edit: Love tapped em and they went in. A little heat in the garage helped I think.

[FLPBFoot]

Glad they went through. Mine had a small burr on the sleeves. I chased them with a drill bit and then the bolts went in no issue.

[BRRT]

Glad they went through. Mine had a small burr on the sleeves. I chased them with a drill bit and then the bolts went in no issue.

Mine were the same, quite burred on the ID. Ran a drill through them then he bolt went through.