View Full Version : Cab interior width
Guardm16
11-23-2023, 03:38 AM
What is the interior width in the cab of the 35 gen 2 truck? Mine will be delivered in about two months. There are several aftermarket bench seats available, but I want to find one that will fold forward or I can do a flip design. However the width, both at the seat and at the shoulders is going to be the determining factor. Any information would help. Thanks in advance.
Steve
DonImbimbo
11-28-2023, 12:04 PM
The width at the rear of the cab is 46 inches between the frame uprights.
At the front where the doors hinge it is 42 inches.
Don't forget about the driveshaft tunnel. 6.25 tall by 5.5 inches wide.
Don
What is the interior width in the cab of the 35 gen 2 truck? Mine will be delivered in about two months. There are several aftermarket bench seats available, but I want to find one that will fold forward or I can do a flip design. However the width, both at the seat and at the shoulders is going to be the determining factor. Any information would help. Thanks in advance.
Steve
Guardm16
11-29-2023, 04:29 PM
Thank you. I was looking at several bench seats, some for the back of jeeps etc. But then I came across this mount that I think could be modified to work and would get the bench over the driveshaft tunnel.
192793192795 For less than $300 it looks solid.
Guardm16
11-30-2023, 03:01 PM
The width at the rear of the cab is 46 inches between the frame uprights.
At the front where the doors hinge it is 42 inches.
Don't forget about the driveshaft tunnel. 6.25 tall by 5.5 inches wide.
Don
46 inches, that is about 4 inches wider than I thought, thank you
chuck35truck
12-21-2023, 06:04 PM
What is the interior width in the cab of the 35 gen 2 truck? Mine will be delivered in about two months. There are several aftermarket bench seats available, but I want to find one that will fold forward or I can do a flip design. However the width, both at the seat and at the shoulders is going to be the determining factor. Any information would help. Thanks in advance.
Steve
I used FFR bench seats as I am pretty much a rookie. I used trunk hinges from a MB sedan. They work great. Unfortunately I don't have any pictures. But I will shoot some tomorrow.