Felpro Gasket #?

[scrubs]

Looking to add some bling to the engine bay with new valve covers.

I have a carbureted BPE 347. Any help on which gasket?

thanks in advace,

j

[Papa]

These are what I used: FEL-PRO VS 13264 T Valve Cover Gasket Set

https://www.amazon.com/FEL-PRO-VS-13264-Valve-Gasket/dp/B000CNJ4A2/ref=sr_1_1?crid=2H19PA5U9Y5NQ&keywords=FEL-PRO+VS+13264+T+Valve+Cover+Gasket+Set&qid=1700596486&s=automotive&sprefix=fel-pro+vs+13264+t+valve+cover+gasket+set%2Cautomotive %2C108&sr=1-1

They are reusable, so if you already have them on the car with the installed valve covers, you should be good to go.

[scrubs]

Thanks, Papa. I should be paying you a retainer at this point.

[Mike.Bray]

Moroso make a very good valve cover gasket, I used these (https://www.summitracing.com/parts/mor-93060) on my 351W. I've had the valve covers off a few times with never an issue.