ADI
11-15-2023, 01:21 PM
It`s definitively a sad moment. Life did throw a curved ball on my plans and I have no time at all to finish my build. Instead of collecting dust in the garage, I decided to sell it. If you have the desire to jump into a modern looking FFR MK-IV sooner than later that`s your chance.
https://thefactoryfiveforum.com/attachment.php?attachmentid=192355&d=1700071907
Here is my build thread:
https://thefactoryfiveforum.com/showthread.php?41353-ADI-s-Build-Thread
Specs / parts that are part of the sale.
FFR MK-IV kit:
Powder coated chassis
Coyote Mounts
Stainless steel exhaust
Independent suspension
Coil over Koni shocks
Cut-out fiberglass
All other hardware
Coyote Gen 3 engine
6 speed MT82 transmission
Mustang Cobra Torsen rear differential
Engine management - FuelTech FT550 + 2 Nano + Sparkpro - Dyno tested with 470HP @ the wheels
Ford performance 60lb/hr injectors
Several parts for tuning the Gen3
Power steering from KRC
Wilwood front brakes
Wilwood pedal
Rear brake manual valve
Electric E-brake
Optima (yellow) battery w/ Breeze battery support on engine bay
Hi amp alternator from Mechman
Formacar MT82 adapter for shifter
Tailored driveshaft
Konig Wheels (Matt black R18 10.5 rear, R18 9.5 front)Nitto NT-101 tires (275/35ZR18 front, 315/30ZR18 rear)
Carbon fiber dash with glove box
Full set of Speedhut gauges
Full set of billet aluminum buttons (including on the transmission tunnel cover) and warning lights
All electrical components in conduits and connected with waterproof Deutsch connectors
New gas tank
Breeze trunk extension
Breeze seat support
Breeze Radiator shroud
Breeze Trunk cubby
Breeze KoolMat kit (not yet installed)
Heated seats hardware
Carbon fiber Ford Mustang gear shifter
Ford performance racing steering wheel with quick connect
Kirko low back seats (+ the FFR ones)Black Alcantara (3 yrd) for seats and center console (still on the roll)
And much more that I`m probably forgetting to list.
The car is at the "Go Kart" stage, meaning it runs and performs as it is supposed to. Whoever picks it up will have to finish the interior (upholstery) and move on to the body prep (have not touched anything on the body yet.
All parts (aside of the engine/transmission and differential) were purchased new and I have all the documentation for it.
As you can see in the picture or the build thread, my idea was to create a more modern look (all black, no chrome) with a dark color (dark blue) body, but at this stage it is up for the new owner to decide.
Quick math showed me that I spend (hopefully my wife does not see this) more than $58K on parts alone, including the kit.
Asking $50K.
I`m in North Carolina in Chapel Hill. (2 hrs from Charlotte or 30 min from Raleigh)
Please email / text for any inquires and hi def pics
(919)-525 4826 - stephan4x4@gmail.com
https://thefactoryfiveforum.com/attachment.php?attachmentid=192355&d=1700071907
Here is my build thread:
https://thefactoryfiveforum.com/showthread.php?41353-ADI-s-Build-Thread
Specs / parts that are part of the sale.
FFR MK-IV kit:
Powder coated chassis
Coyote Mounts
Stainless steel exhaust
Independent suspension
Coil over Koni shocks
Cut-out fiberglass
All other hardware
Coyote Gen 3 engine
6 speed MT82 transmission
Mustang Cobra Torsen rear differential
Engine management - FuelTech FT550 + 2 Nano + Sparkpro - Dyno tested with 470HP @ the wheels
Ford performance 60lb/hr injectors
Several parts for tuning the Gen3
Power steering from KRC
Wilwood front brakes
Wilwood pedal
Rear brake manual valve
Electric E-brake
Optima (yellow) battery w/ Breeze battery support on engine bay
Hi amp alternator from Mechman
Formacar MT82 adapter for shifter
Tailored driveshaft
Konig Wheels (Matt black R18 10.5 rear, R18 9.5 front)Nitto NT-101 tires (275/35ZR18 front, 315/30ZR18 rear)
Carbon fiber dash with glove box
Full set of Speedhut gauges
Full set of billet aluminum buttons (including on the transmission tunnel cover) and warning lights
All electrical components in conduits and connected with waterproof Deutsch connectors
New gas tank
Breeze trunk extension
Breeze seat support
Breeze Radiator shroud
Breeze Trunk cubby
Breeze KoolMat kit (not yet installed)
Heated seats hardware
Carbon fiber Ford Mustang gear shifter
Ford performance racing steering wheel with quick connect
Kirko low back seats (+ the FFR ones)Black Alcantara (3 yrd) for seats and center console (still on the roll)
And much more that I`m probably forgetting to list.
The car is at the "Go Kart" stage, meaning it runs and performs as it is supposed to. Whoever picks it up will have to finish the interior (upholstery) and move on to the body prep (have not touched anything on the body yet.
All parts (aside of the engine/transmission and differential) were purchased new and I have all the documentation for it.
As you can see in the picture or the build thread, my idea was to create a more modern look (all black, no chrome) with a dark color (dark blue) body, but at this stage it is up for the new owner to decide.
Quick math showed me that I spend (hopefully my wife does not see this) more than $58K on parts alone, including the kit.
Asking $50K.
I`m in North Carolina in Chapel Hill. (2 hrs from Charlotte or 30 min from Raleigh)
Please email / text for any inquires and hi def pics
(919)-525 4826 - stephan4x4@gmail.com