Log in

View Full Version : Mystery Part - Need help identifying



maclonchas
11-12-2023, 08:23 AM
Folks,

As I go through my boxes and look at parts, some just baffle me. I have this part that was in my radiator cooling parts. For the life of me I cannot figure what this part is or where it goes ? Please help.

[ATTACH=CONFIG]192124

Thanks for the help

michael everson
11-12-2023, 11:24 AM
not anything I have ever seen before. Must have "fallen" into your box.
Mike

Railroad
11-12-2023, 11:40 AM
Is that what the out put shaft plug for a new trans looks like?
More pictures might tell more.

Mike.Bray
11-12-2023, 11:44 AM
Whatever it is it's HUGE! Just look at it compared to the car.

BRRT
11-12-2023, 01:31 PM
Whatever it is it's HUGE! Just look at it compared to the car.

That would have been delivered in a truck all by itself! :-)

rich grsc
11-12-2023, 01:34 PM
Right hand blinker fluid seal

65 Cobra Dude
11-12-2023, 03:07 PM
Steering rack bushing?

Henry

Jeff Kleiner
11-12-2023, 03:50 PM
Sometimes I think the boys at FFR just throw an odd part in for giggles and to drive builders nuts ;)

Jeff

Papa
11-12-2023, 04:07 PM
There's probably someone at FFR looking for it. It likely belongs to a piece of machinery that they use to manufacture various parts.

egchewy79
11-12-2023, 04:43 PM
Looks like cab mount bushings for a truck. Perhaps parts of the pre runner made it in your box. The fact that the bushings are marked is interesting

Dave M
11-12-2023, 11:10 PM
I would say too small for a body mount. Does it look the same on the other side?

Nigel Allen
11-13-2023, 01:34 AM
Perhaps it's a foofer valve? Personally, I have never laid eyes on one, but I nearly blew a foofer valve lifting a couch the other day.

maclonchas
11-13-2023, 07:00 AM
No it has a rubber insert flanged mount
192176

rich grsc
11-13-2023, 09:50 AM
Google the part #, then store in the round file

Mastertech5
11-13-2023, 02:02 PM
No results found on a FFR site Parts search with the part #.

gbranham
11-13-2023, 03:04 PM
It looks a little like a rubber bushing in a sway bar end link like I'd see on a Fox Mustang or even my Ram pickup.

drewr
11-13-2023, 05:21 PM
Is it a valve cover PCV valve/breather grommet?

MB750
11-13-2023, 06:25 PM
How about putting it next to something with a consistent reference for size, like a dollar bill?

Norm B
11-14-2023, 11:56 AM
Believe you are the proud owner of one upper shock absorber or strut mount bushing for an unknown vehicle.

Norm

BRRT
11-15-2023, 11:05 AM
Perhaps it's a foofer valve? Personally, I have never laid eyes on one, but I nearly blew a foofer valve lifting a couch the other day.

I hate it when that happens.....