Roadster side louvers

[Falcondriver]

Anyone have a line on assembled side louvers? FF out of stock, Finish Line website says they are in stock but there is no select button to order.

[michael everson]

Pretty sure FF has them. You need to call them.
Mike

[Falcondriver]

Thanks

[mikeinatlanta]

Got mine from Vraptorspeedworks. IMO they are the nicest available.

[djm73]

Taylor at F***** L*** has been out with pneumonia, but says he will be back in next week. He runs a one man shop so understand he's been behind. If I lived in Oakley, I'd go help him.

Also FF says they are getting some side louver stock next week as well.

[Steve1979]

I got mine from Whitby Motorcars a long time ago and they appear to still have them.

Best,

[John Ibele]

Got mine from Vraptorspeedworks. IMO they are the nicest available.

Any chance you've got a photo of those mounted on a roadster, Mike?

[GoDadGo]

F.Y.I.

You can make the standard Factory-5 louvers look rather nice with a little work.
Shown below is how mine turned out and 3 years later they still look great.

Louver Bending Video:
https://youtu.be/QyMN73IW6I8

What they look like on the car:
https://youtu.be/9WEe6-wdNtA

Last Week's 3 Year Update Video:
https://youtu.be/iwslgKJUaKc

While the prefabbed louvers look good, if you take a little time the base louvers can work and work well.
Also, my 383 Emblems hold them on since they are a pin through & nut design.

Good Luck!

[Lidodrip]

F.Y.I.

You can make the standard Factory-5 louvers look rather nice with a little work.
Shown below is how mine turned out and 3 years later they still look great.

Louver Bending Video:
https://youtu.be/QyMN73IW6I8

What they look like on the car:
https://youtu.be/9WEe6-wdNtA

Last Week's 3 Year Update Video:
https://youtu.be/iwslgKJUaKc

While the prefabbed louvers look good, if you take a little time the base louvers can work and work well.
Also, my 383 Emblems hold them on since they are a pin through & nut design.

Good Luck!

Steve, those louvers turned out great - very impressed!

James

[Mat1asBEV&ICE]

I called FF directly a few weeks ago and they said "we don't know when we'll get them back in". Sounds like the supplier is having issues.

[BEAR-AvHistory]

Got these assembled louvers from Whitby Motor Cars and had them paint then when they painted the car.

https://thefactoryfiveforum.com/attachment.php?attachmentid=196931&d=1710660786

[Mbufford]

I called FF directly a few weeks ago and they said "we don't know when we'll get them back in". Sounds like the supplier is having issues.

I’ve been wondering about this. The assembled louvers are the only item still outstanding on my POL sheet. I hope they get them in the next few months…