Engine install , flawless

[Bill Elliott]

So even though I posted this in my build thread I though I would post it here in the main roadster page, as this will help others when they do a google search for engine install tips. I can say that this big day was super easy, lots of reading of other threads. One thing I noticed is how so many struggle with the driveshaft after the engine is already in. So, just before getting the engine all the way down to where I still had an extra 6-8 inches between the trans output and the driveshaft adapter I slid the driveshaft in then continued to lower the engine the rest of the way down. This should be text book procedure, don't fight with it after the engine is in. I used a 2 ton hoist and a good leveler from Summit engine leveler (https://www.summitracing.com/parts/WMR-W41036). I also had the trans bracket in place also prior to dropping it in , was not a hindrance at all.

https://thefactoryfiveforum.com/attachment.php?attachmentid=191922&d=1699231928https://thefactoryfiveforum.com/attachment.php?attachmentid=191924&d=1699231928https://thefactoryfiveforum.com/attachment.php?attachmentid=191914&d=1699231534https://thefactoryfiveforum.com/attachment.php?attachmentid=191917&d=1699231777https://thefactoryfiveforum.com/attachment.php?attachmentid=191926&d=1699232225

[runamuk]

Yep, I installed my driveshaft a couple of weeks after installing the engine and I was definitely kicking myself for not thinking about it.

[John Ibele]

Mentioned by others previously, but worth repeating so newer builders see it. Even if you only temporarily insert the drive shaft in the tranny before installing the engine, it gives you confidence knowing it does, in fact, absolutely fit. It's a huge benefit doing it the way you described.