Roadster EFI fuel filter replacement

[Nigel Allen]

I am using the kit supplied EFI fuel filter. I purchased the kit in 2011 and its been on the road for the last 3 years with ~12,000 kilometres on the clock. I guess it probably wouldn't hurt to replace it. I need some help from the brains trust on what the part number might be, as I can't find any markings. It is unlikely that it is sold in Australia, so if someone has a Summit part number it would be super appreciated, as I have an account with them. plus their shipping is by far the least painful.

Many thanks,

Nige

[phileas_fogg]

Hi Nigel,

I'm using a Wix 33097 (https://www.wixfilters.com/Lookup/Exactmatch.aspx?PartNo=33097; Summit says it's not available at this time) for my Holley Terminator EFI. It's got the 5/16" quick connects on both sides, and is rated for 10 microns.

Before you get too far down that path, I recommend you confirm the 10u filter is adequate for your Coyote (almost certain it will be, but better to check now than learn a very expensive lesson). Also, double check the size of the inlet & outlet; you may prefer 3/8" diameter.


John

[Nigel Allen]

Hi Nigel,

I'm using a Wix 33097 (https://www.wixfilters.com/Lookup/Exactmatch.aspx?PartNo=33097; Summit says it's not available at this time) for my Holley Terminator EFI. It's got the 5/16" quick connects on both sides, and is rated for 10 microns.

Before you get too far down that path, I recommend you confirm the 10u filter is adequate for your Coyote (almost certain it will be, but better to check now than learn a very expensive lesson). Also, double check the size of the inlet & outlet; you may prefer 3/8" diameter.


John

Cheers John!

Found a local supplier. Really appreciate your help. Love this forum!