Clutch Cable and Firewall Adjuster

[Junbug]

So i'm going with cable clutch and I bought a Ford OEM clutch cable from Mike Forte after initially trying the FFR provided one. I have a firewall adjuster (blue in background of pic) and I'm curious if I need to disassemble part of the Ford firewall piece since I need to have the firewall adjuster. I put numbers on the picture for the different parts of the cable firewall head. Any advice and tips would be appreciated.
https://thefactoryfiveforum.com/attachment.php?attachmentid=191297&d=1697601862

[Dash]

So i'm going with cable clutch and I bought a Ford OEM clutch cable from Mike Forte after initially trying the FFR provided one. I have a firewall adjuster (blue in background of pic) and I'm curious if I need to disassemble part of the Ford firewall piece since I need to have the firewall adjuster. I put numbers on the picture for the different parts of the cable firewall head. Any advice and tips would be appreciated.
https://thefactoryfiveforum.com/attachment.php?attachmentid=191297&d=1697601862

Yes, you need to remove the rubber part and the metal ring around it. #2 and #3 in the pic you labeled. It will work perfect then! I had to cut the rubber piece off, as I could not slip it off....

Chris

[Jeff Kleiner]

1 & 4 are the same piece. Remove 2 & 3. You may have to trim the “nubs” from the #4 end for it to fin inside the bore of the adjuster.

Jeff

[Junbug]

Perfect! Thanks for the assistance gents.
-Bryan