willie knuckles
09-25-2023, 02:11 PM
I have confused myself (it doesn't take much) in regards to the orientation of the steering arms. I originally had the arms angled "out" when viewed from the top, but had them so that the arms sloped 'up" when viewed from the side. In one of the threads I read I got the impression that I had them incorrect and changed them to this setup : -- still angled "out" but they now slope "down" as noted in the pics. However, in the current configuration I have noted that the holes are tapered with the widest portion at the top.
190434190435
The pics are of the front left, as I currently have them configured.
Your help is appreciated!
ps - If I have to adjust the steering arms (take off the brake, rotor, hub), can I re-use the axle nut (or is it best to replace them once torqued and then removed)?
190434190435
The pics are of the front left, as I currently have them configured.
Your help is appreciated!
ps - If I have to adjust the steering arms (take off the brake, rotor, hub), can I re-use the axle nut (or is it best to replace them once torqued and then removed)?