Scott’s hot rod triple reservoir

[danmas]

Hi builders!

I have the Scott’s hot rod reservoir and I’m starting to look at mounting options. I saw one builder used the coyote pdb bracket. A couple guys have made their own bracket. Anyone have a simple suggestion or a bracket I can order? I suppose I could order an angle bracket. I thought would check in for other ideas.

[cv2065]

Looks like you have one of these about 40 minutes from you in Sheridan CO. I have one close to me as well. They have just about any metal or angle you can imagine and will cut it to any length. I had them cut a 4x3 1/4" aluminum angle on my last build. Worked great. It was only about $20.

https://www.metalsupermarkets.com/store-finder/

[TBull]

I have that same system. I copied from DanW and cut it into the top of the footbox. I liked the cleaner look an left more space to work. I made a bracket that mounted into the wilwood pedal box and then cut the top hatch around the reservoirs.

190436

[mikeinatlanta]

I have that same system. I copied from DanW and cut it into the top of the footbox. I liked the cleaner look an left more space to work. I made a bracket that mounted into the wilwood pedal box and then cut the top hatch around the reservoirs.

190436

Nice work!

[danmas]

I have that same system. I copied from DanW and cut it into the top of the footbox. I liked the cleaner look an left more space to work. I made a bracket that mounted into the wilwood pedal box and then cut the top hatch around the reservoirs.

190436

I saw this several days ago when I started looking. Your work is quite literally stunning. I am not that skilled. Probably something for my third or fourth car. Seriously nice work.

[scrubs]

I have that same system. I copied from DanW and cut it into the top of the footbox. I liked the cleaner look an left more space to work. I made a bracket that mounted into the wilwood pedal box and then cut the top hatch around the reservoirs.

190436

This is ridiculously beautiful.

[Mountain-Metalworks]

Hey Danmas,
I haven't seen what the Scott's triple reservoir has for mounting on the back but I can take a look. From there, I'd ask what are you looking for. Something REALLY custom like TBull or a more simplified version that mounts to the 1x1 square tube on the Roadster. I have the old CNC triple that I don't think is available anymore, but I made a simple bracket several years ago to mount the reservoirs. If you're looking for something simple or even an immensely complex billet aluminum mount, let me know.

I've even thought about making our own triple reservoir fully CNC machined from billet aluminum, but haven't gone down that path yet without significant demand.

https://thefactoryfiveforum.com/attachment.php?attachmentid=69650&d=1498833925

-TJ
Mountain Metalworks