Brake bleeder Motive 0107

[Junbug]

Will the Motive model 0107 power bleeder kit fit the standard FFR brake reservoirs?
https://www.summitracing.com/parts/mvp-0107#overview

Thanks,
-Bryan

[Mike.Bray]

99% sure you will need to get a spare cap and modify it for a hose barb. That's what I did for my Scott's reservoir.

[Mastertech5]

Motive sells a cap with hose to fit wilwood reservoirs. I have one. Got my whole setup from Summit.

[rthomas98]

This is the exact one that I got and it fit the factory five reservoir perfectly.

https://www.amazon.com/gp/product/B0002KM5L0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[Junbug]

This is the exact one that I got and it fit the factory five reservoir perfectly.

https://www.amazon.com/gp/product/B0002KM5L0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Perfect. Exactly what I needed.
Thanks,
-Bryan

[cc2Arider]

Hey Bryan,

Bump on this thread...

Did you get that Motive power bleeder referenced by RThomas98? The Amazon description says "European". I just need the adapter. According to the Motive website, the "European" adapter is 45mm threaded diameter. I measured my FFR-supplied billet Al cap and it's 42mm...close enough?

Appreciate the reply!

Thanks Craig C

[gbranham]

Mine fit the kit-supplied reservoir perfectly.

https://a.co/d/72UbsBm

[cc2Arider]

Thanks for the prompt reply Greg :)

I went ahead and ordered one thru the Motive website ...

Craig C

[bartock]

I went with this one and fit fine. I think they are all about the same
https://www.amazon.com/dp/B095JYYQ2P?ref_=ppx_hzsearch_conn_dt_b_fed_asin_ti tle_5