needing help

[jose luis]

Gents,

I have a 93 Grand Marquis rear end to my 33 Hot rod kit that have the same spec of the 86-93 mustang GT rear end. ( 8.8", disk brakes, 59.25" hub to hub )
I cut all the supports and I need to weld in the marquis the 2 supports that hold the news that are included in the kit, but I need to know the distance between the 2 supports, center to center too do that.

I appreciate if somebody give to me the distance that I need.
in a att. there are a drawing.

7134

Tks a lot
Jose

[Brian Z]

Jose,

We do not have the exact spec for the control arm mounts. You will need to set them up to bolt into a fox body mustang. (1979-1993)

Best regards,

[Gopher]

Send me a email address and I can measure the jig I made to do what your doing. I should be able to make you a drawing of what your looking for.