View Full Version : Where do these go?
hitman912
08-23-2023, 02:13 PM
I bought a 289 USRRC that has already been worked on. I just got it painted and am putting it back together but found these brackets and parts leftover. Did I mess up and miss something important?
189240
189241
I know the two large brackets are supports for the LeMans cap. They mount from underneath. I did not use them. The other pieces I'm not sure.
kgkeys
08-23-2023, 02:47 PM
The smallest one is a mounting tab for connection between hard-lines/flexible brake lines.
The diamond shaped one with the hole in the middle is a master cylinder spacer for a mustang-style master cylinder.
The two long, irregular shaped ones are hood-pin mounts.
Don't know about the final two...
Kyle
hitman912
08-23-2023, 02:48 PM
Thank you so much, Rick and Kyle. We were about to drop the tank to put the rear quick jack bolts in and then I got worried.
-Dave
michael everson
08-23-2023, 03:22 PM
the 2 smaller 90 degree parts look like door latch mounts to me.
Mike
hitman912
08-23-2023, 04:25 PM
the 2 smaller 90 degree parts look like door latch mounts to me.
Mike
They could be, but we mounted the door and it latches just fine without these.
Dave M
08-23-2023, 10:38 PM
The 2 odd shaped ones at the top of the first pic are front hood pin brackets if you aren’t using hinges.