narrow front end suspension help

[jrohrig]

Does anyone have any pictures of their front suspension with the narrow pin drive set up. I have the sn95 14625 spindles (part of the kit from 14507), the 13242 pin drive kit (which has the adapter bracket 12507), and the IFS kit 15344. I just don't know if I'm doing this right. I have been searching through a few build threads but can't seem to get good pictures to confirm its correct.

[Jeff Kleiner]

Sounds like you have all of the right parts:

14625 SN95 spindles
12507 specific pin drive spindle adapter
12508 narrow lower control arms

When you put it together the upper control arm installs using the top (horizontal) mounting location.

Jeff

[jrohrig]

Sounds like you have all of the right parts:

14625 SN95 spindles
12507 specific pin drive spindle adapter
12508 narrow lower control arms

When you put it together the upper control arm installs using the top (horizontal) mounting location.

Jeff

Thank you Mr Kleiner. Do you know which 2 of the 4 holes I use on the adapter? It fits easy with the bottom hole and the 2nd one from the top (2 and 4) but the uca looks to be at a weird angle. I can make the top and 3rd hole work but I would have to cut the adapter at the bottom189044189045

[jrohrig]

I found out its the top and 3rd hole from the top. Had to cut off the bottom part (4th hole) 189173of the adapter to get it to fit right. Anyone who has used these spindle adapters before have any issues with the cotter pin for the upper control arm? I don't see how it's possible being surrounded on 3 sides