What do you guys do with the harness excess in the fronts

[scrubs]

I am talking about the harness wiring to the front headlights/markers and as it crosses from DS to PS. I tacked the rears to the outside of the trunk aluminum with zip tie clips, but not sure about the fronts and fan limb.

Getting close.

Thanks, all,

jose

188847

188848

[egchewy79]

I just folded the excess up and zip tied it together. I think I actually needed to lengthen the PS harness to get the wires long enough on my build.

[Jeff Kleiner]

I make the right to left crossover by attaching that leg of the harness to the lower radiator support tube. {{{You do have one of those, right? If not you need one, either from Breeze or home fabricated ;) }}}

Jeff

[scrubs]

I make the right to left crossover by attaching that leg of the harness to the lower radiator support tube. {{{You do have one of those, right? If not you need one, either from Breeze or home fabricated ;) }}}

Jeff

Lower radiator support. Check.

[scrubs]

Oops, posted in wrong thread....