kirby
08-10-2023, 11:17 AM
I purchased a partially complete kit with a Gen 2 Coyote in it. I am attaching the RF harness to the alternator and the post on the alternator does not have a nut on it. Does anybody know the thread pitch and size? I found an OEM ford part but it's $10 bucks for a nut.
edwardb
08-10-2023, 11:30 AM
This isn't going to be much help, but FWIW. Checked my build notes for my Coyote builds where I also had to source that. I didn't record the size or pitch (sorry) but was metric and I bought at Ace Hardware. Should be easy enough to figure out with a thread checker and certainly less than $10.