Gen 3 Coyote Header Pin Socket

[Junbug]

What is the size/type of socket needed to remove the Gen 3 Coyote header pins? Is it a female Torx socket I need to pull those pins from the engine?
Thanks,
-Bryan

[JohnK]

The easier way is to double up two nuts on the exhaust stud and use those to remove them.

[mmklaxer]

I used a 6mm hex socket. Worked without issue

[Junbug]

Thanks guys... both work!
-Bryan

[toadster]

I used a 6mm hex socket. Worked without issue

yup that's what I did too! :)


https://www.youtube.com/watch?v=fdu2ob4Sy9k