Front Brake Help -Solved

[maclonchas]

Folks,

I was doing some adjusting today with the steering and checking side to side clearance of the wheels and everything was going well. I turn to the right one more time and I heard a snap. My banjo bolt line from the caliper to the fitting that separates hard lines broke. Needless to say I have a mess on my hands. I do not have a spare line (my fault), but I had an old line that I could use in the interim to slow the leak. Can anyone tell me what part number this line is and if I can get locally?

188447188448

This is the line I am talking about above.

Thanks for the help.

Bill

[gbranham]

Wow, good thing you found this problem now, rather than while driving. I don't have the part number, but if you call Factory Five, they certainly will. Also, I did a quick Amazon search for 20" stainless braided brake hoses, and found several that looked to be the same.

Good luck,

Greg

[maclonchas]

I ordered from Breeze yesterday the hoses and will have a spare on hand once I do this replace.

Thanks

[CraigS]

You may also want to change how the other end mounts to the frame. Dill the rivets for the mount plate out and mount it to the top of the 3/4x3/4 frame tube. See my old MkII here.
188515