Front turn signal bezels

[Falcondriver]

I have a new MK4 kit. The front turn signals have a bezel on them that when the light is mounted flush against the body does not come up flush with the body surface. These bezels seem to have a friction fit, what keeps them from vibrating of over time. I have tried pressing them further back to make them flush but they just move back to their original position.

Any thoughts.

[BEAR-AvHistory]

Its pretty common to fit an O ring into the gap.

https://thefactoryfiveforum.com/attachment.php?attachmentid=187294&d=1689612023

[Jeff Kleiner]

Man, I thought everybody knew this by now! Oh well, here ya' go:

https://www.ffcars.com/threads/42-cent-upgrade.484369/#post-4527465

Cheers,
Jeff (Captain O-Ring)

[AA-ron]

Right or wrong, I ended up drilling and taping a small set screw on the bottom side of the bezel as I could not get mine to engage properly, or at least well enough where I didn't fear them ending up in the car behind me.

[Mike.Bray]

I got tired of messing with them so I just eliminated them.

https://www.imagecoast.com/images/MichaelBray1/20230606111117mediumrotated.jpg