UpNorth
07-08-2023, 03:33 PM
Hi all,
I’m under 60 miles of enjoyment with my 65 coupe and have a small problem.
Today was the second time the tach stopped working for about 5-10 or so minutes then comes back to life.
First time I kind of forgot about it, but this time no.
I have a 347 BPE with Sniper.
There is the yellow wire attached to the negative side of the coil going to the 7-pin Sniper connector.
And I wired the purple coil-tach wire of the Ron Francis harness to the dark brown wire out of the 10 pin connector from the Sniper.
Other than the yellow wire there is the orange wire (going to the fuse block) both tightly attached to the coil’s negative pole.
Any idea what I did wrong?
TIA
Francois
I’m under 60 miles of enjoyment with my 65 coupe and have a small problem.
Today was the second time the tach stopped working for about 5-10 or so minutes then comes back to life.
First time I kind of forgot about it, but this time no.
I have a 347 BPE with Sniper.
There is the yellow wire attached to the negative side of the coil going to the 7-pin Sniper connector.
And I wired the purple coil-tach wire of the Ron Francis harness to the dark brown wire out of the 10 pin connector from the Sniper.
Other than the yellow wire there is the orange wire (going to the fuse block) both tightly attached to the coil’s negative pole.
Any idea what I did wrong?
TIA
Francois