MPTech
06-23-2023, 03:18 PM
Doing a mild rebuild of my 2011 MK4 (installing a freshly upgraded 347, new fuel system front-to-back, front brake upgrade, mechanical throttle and new firewall, re-plumb heater, and a couple other minor upgrades).
I pulled the body off to access things easier behind the dash and replace the firewall.
In the process, I'm seeing that a lot of the bulb seal is torn / missing and needs to be replaced.
Can anyone tell me what (item # or description) / where to order it (McMaster-Carr??) and how much comes with the kit (I'm going to measure what I need, but thinking of replacing all of it).
I see a couple varieties here, but not sure which one or the dimensions.
https://www.mcmaster.com/products/bulb-seals/water-and-weather-resistant-hollow-foam-rubber-push-on-seals-with-bulb-on-top/
I pulled the body off to access things easier behind the dash and replace the firewall.
In the process, I'm seeing that a lot of the bulb seal is torn / missing and needs to be replaced.
Can anyone tell me what (item # or description) / where to order it (McMaster-Carr??) and how much comes with the kit (I'm going to measure what I need, but thinking of replacing all of it).
I see a couple varieties here, but not sure which one or the dimensions.
https://www.mcmaster.com/products/bulb-seals/water-and-weather-resistant-hollow-foam-rubber-push-on-seals-with-bulb-on-top/