View Full Version : Aluminum panel parts list?
iconicflux
06-17-2023, 06:42 AM
Is there a parts list for the aluminum panels? I was considering building my own cerakote oven and was hoping to figure out the cost breakdown between diy cerakote, paying for powder coating, or using some type of bed liner to coat the bottom.
Thanks!
rich grsc
06-17-2023, 07:15 AM
Just so you know, CeraKote is air cured.
The aluminum panel parts are listed in a diagram in the build manual for the mounted panels and in your inventory for the loose panels.
Windsor
06-17-2023, 11:05 PM
Just so you know, CeraKote is air cured.
?
Then why do they recommend a curing oven?
https://www.cerakote.com/resources/knowledge-base/127/what-equipment-do-i-need-to-start-applying-cerakote
rich grsc
06-18-2023, 09:23 AM
Sorry I wasn't clear, there are two types, air cured and oven cured. The oven cured is for extreme heat if I remember, but for you use, the air cured is perfect.
RBachman
06-18-2023, 02:03 PM
?
Then why do they recommend a curing oven?
https://www.cerakote.com/resources/knowledge-base/127/what-equipment-do-i-need-to-start-applying-cerakote
Rob,
Check out the Cerakote Air-cure ("C" series) coatings.
https://www.cerakote.com/shop/cerakote-coating?finishes=cera_air
For most of our applications (including headers) there really isn't a significant technical or performance benefit with oven cure other than a greater color/finish selection, and many of the air-cure colors meet the same temperature ratings (1,800 degrees F.).