REAR Shock mounts, spacers how, what????

[Just 1 More]

How did y'all set up your spacers for the rear shocks? I think i'm missing some and probably going to have to make my own.

From the manual "Attach the rod end of the shock to the upper shock mount using the two equal length 0.675” kit spacers,
½”x 3” bolt, ¾” wrench and socket."
"Install the shocks (body down) to the rear axle assembly. Right side - The longer spacer (FFR# 33238) is
placed at the front of the shock and the smaller 0.125” shim (FFR# 13210) is placed at the rear. Use the
3.25” long bolts for the axle mount."

185711
185712

[RoadRacer]

Mine looks like that. These are both taken quickly of the right p/s shock.

185715 185716

[Just 1 More]

Mine looks like that. These are both taken quickly of the right p/s shock.

185715 185716

Thanks, I think I figured it out. I made a couple spacers to make it the same each side.

[Dgc333]

I put mine together exactly as it is described in the manual. Getting the .125 spacer inbetween the shock and the bracket took some fiddling but once together everything clears.

[Just 1 More]

I put mine together exactly as it is described in the manual. Getting the .125 spacer inbetween the shock and the bracket took some fiddling but once together everything clears.

That's the spacer I was missing and had to make my own