maclonchas
05-24-2023, 09:41 AM
OK Folks,
I am in a hold up for some parts and so I am starting to wrap my head around the wiring harness and modifications I am making to the dash and starter. First off, I will be running an LS3 Engine with an ECU and its own PDB (Engine Fuse Box). Second, I am going to a digital dash vice the traditional gauges that LCDDash is putting together for me. Here is a look at the preliminary LCD screen (12 inch):
184861
I also plan to use the New Vintage USA switch panel: https://newvintageusallc.mybigcommerce.com/toggle-switch-panels/
I have laid out the preliminary power wiring and ignition switch wiring:
184862
Please check my work and make sure I did not miss something in the power wires or start. I am trying to eliminate the key switch and will not use a master cutoff switch at this time. I still need to add to the battery connectors for a trickle charge.
Once I get this part of the electrical completed, I will start to work the headlights, turn signals and hazards.
Thanks
Bill
I am in a hold up for some parts and so I am starting to wrap my head around the wiring harness and modifications I am making to the dash and starter. First off, I will be running an LS3 Engine with an ECU and its own PDB (Engine Fuse Box). Second, I am going to a digital dash vice the traditional gauges that LCDDash is putting together for me. Here is a look at the preliminary LCD screen (12 inch):
184861
I also plan to use the New Vintage USA switch panel: https://newvintageusallc.mybigcommerce.com/toggle-switch-panels/
I have laid out the preliminary power wiring and ignition switch wiring:
184862
Please check my work and make sure I did not miss something in the power wires or start. I am trying to eliminate the key switch and will not use a master cutoff switch at this time. I still need to add to the battery connectors for a trickle charge.
Once I get this part of the electrical completed, I will start to work the headlights, turn signals and hazards.
Thanks
Bill