Grease zerk access

[neilkuy]

Has anyone replaced some of the grease zerks with angled ones for post build maintenance access? I am looking at the front LCAs. Replacing the zerks with 90s would allow them to be accessed from beneath without a fight. The rears Infact don’t seem to be accessible at all once installed without some dissasembly

[David Williamson]

I have a 90 deg fitting on my grease gun that helps but yes I have changed some zerks to 45 and 90 deg. On the front upper "A" arms I have the zerks on the top and with the 90 drg fitting on the grease gun I can reach them easily.
David W

[mikeinatlanta]

This.
https://www.amazon.com/Hydraulic-Grease-Fitting-Straight-Angled/dp/B075DXD7WC/ref=asc_df_B075DXD7WC/?tag=hyprod-20&linkCode=df0&hvadid=198097951144&hvpos=&hvnetw=g&hvrand=14129973868381423304&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9010915&hvtargid=pla-376016260750&psc=1

[Fasteddie41458]

This.
https://www.amazon.com/Hydraulic-Grease-Fitting-Straight-Angled/dp/B075DXD7WC/ref=asc_df_B075DXD7WC/?tag=hyprod-20&linkCode=df0&hvadid=198097951144&hvpos=&hvnetw=g&hvrand=14129973868381423304&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9010915&hvtargid=pla-376016260750&psc=1

What size do we need for front and rear?

[mikeinatlanta]

No way to know that until you remove the old one.

[Scott L]

I changed all my front control arm zerks (upper and lower) to 45 and 90 degrees. So easy to do now I do it every few months.
Got mine here - https://locknlube.com/collections/grease-fittings

[DonImbimbo]

I'm doing a 35 Truck build, but I have already replaced the grease zerks on the LCAs to a 45 degree fitting.

[Its Bruce]

Yes, they sell them in a combo box of straight, 45 and 90's in Autozone for about $6.