Side pipe adjustment

[JMJ]

Running GP headers with factory pipes. After adding a wedge from Breeze, I have the proper spacing from the body front to back however, can someone advise me how to raise the tip? I need to raise the tip of the pipe approximately 1” to level it off. Thanks in advance

[JohnK]

You can use 5/16 bolts instead of 3/8, which will give you some ability to rotate the side pipe to level it. If needed, you can also drill the holes in the header and side pipe mounting flanges just a touch larger to give yourself even a little bit more wiggle room.

[JMJ]

Perfect. Thank you.