Roll Bar Bezels & Quick Jacks

[Ted G]

Looking to get some roll bar bezels for 1 3/4" roll bar. I must have thrown mine away. UGH. Anyone have a connection?

Also, looking for some chrome quick jacks.

I know ********** used to have the quick jacks, but they've been backordered for some time.

[JohnK]

Hey Ted. JFYI - I believe the ********** quick jacks are a different shape than the FFR ones and may not fit correctly.

[JJK]

for roll bar bezels, check out Mike Everson at replicaparts.com, he has some

[Ted G]

Picked up a set of roll bar bezels from Mike Everson..... Does anyone know if the Shell Valley quick jacks will fit FFR? The spacing is 2 1/4" for FFR.


Thanks,

[egchewy79]

check classified. there are always steel QJs that you could get chromed.

fwiw, i got my steel QJs powder coated in chrome paint. not quite a shiny as real chrome, but more like polished aluminum.

[JohnK]

I should have elaborated more in my previous post. It's more than just the hole spacing on the quick jacks. The Finish Line and Shell Valley quick jacks are patterned after the original cobra quick jacks. The FFR quick jacks have the holes positioned much lower on the QJ. Here's the Shell Valley:

https://thefactoryfiveforum.com/attachment.php?attachmentid=184148&d=1683477299

And here are the FFR quick jacks:

https://thefactoryfiveforum.com/attachment.php?attachmentid=180062&d=1676517218

Notice where the holes are relative to the top of the QJ. IMO, if you try to mount the Finish Line/Shell Valley/real Cobra QJ's on an FFR, they will sit way too low.

[Ted G]

check classified. there are always steel QJs that you could get chromed.

fwiw, i got my steel QJs powder coated in chrome paint. not quite a shiny as real chrome, but more like polished aluminum.

egchewy, I just might do that. I have the QJ's, just not finished.

[Ted G]

I should have elaborated more in my previous post. It's more than just the hole spacing on the quick jacks. The Finish Line and Shell Valley quick jacks are patterned after the original cobra quick jacks. The FFR quick jacks have the holes positioned much lower on the QJ. Here's the Shell Valley:

https://thefactoryfiveforum.com/attachment.php?attachmentid=184148&d=1683477299

And here are the FFR quick jacks:

https://thefactoryfiveforum.com/attachment.php?attachmentid=180062&d=1676517218

Notice where the holes are relative to the top of the QJ. IMO, if you try to mount the Finish Line/Shell Valley/real Cobra QJ's on an FFR, they will sit way too low.


Thanks John, that is a significant difference for sure. Plus, Shell Valley wants $300. I'm going to try and finish mine and see what the outcome is.

Thanks all.

[Mike.Bray]

I had the ones supplied by FFR with the kit chromed and they look great. Wasn't that big a deal.

https://www.imagecoast.com/images/MichaelBray1/20230127151837medium.jpg