View Full Version : rollover valve/vent
theidlemind
04-20-2023, 08:41 PM
Could someone post a picture of the fuel tank rollover valve/vent please?
I've tried three times to get it from Factory Five and they keep sending me a fuel filter.
I have plenty of fuel filters now.
A part number would be awesome. I'm ready to just buy one.
This is the vent that pushes into the grommet at the top of the tank.
Thank You!!
narly1
04-20-2023, 09:17 PM
I just inventoried my Canadian completion kit
FFR pn#15719 fuel tank vent
The vent screws into a plastic bushing FFR pn#15205 vent bushing. The gasket that goes between the bushing and the tank (no photo because it was on my POL) is FFR pn# 33973 fuel tank vent gasket
Photos of both below.
183254183255
The vent is marked TEMCO 90-00945, found it online at this company, there may be others...:
https://www.fillernecksupply.com/1-2-npt-brass-gas-tank-rollover-safety-valve-vent-9000945-ftav45/
Earl
Mastertech5
04-20-2023, 09:45 PM
I have them that I didn't use because I bought the one Breeze Automotive has because it has a larger hose which is better suited to my GM canister that came with my engine. If you can't get them from FFR I'll send them to you for shipping cost.
Higgybulin
04-21-2023, 05:38 AM
Pretty sure this is the same...
https://www.amazon.com/Dorman-911-060-Fuel-Tank-Valve/dp/B00OZVOIPI/ref=pd_vtp_h_pd_vtp_h_sccl_3/134-1360082-9544735?pd_rd_w=sJPyE&content-id=amzn1.sym.a5610dee-0db9-4ad9-a7a9-14285a430f83&pf_rd_p=a5610dee-0db9-4ad9-a7a9-14285a430f83&pf_rd_r=BYEBZSJ257S051C2VPSG&pd_rd_wg=lKDpB&pd_rd_r=03d9a95d-389d-41ce-8cdf-1a305a3b5235&pd_rd_i=B00OZVOIPI&psc=1
TxMike64
04-22-2023, 07:27 PM
I've tried three times to get it from Factory Five and they keep sending me a fuel filter.
I have plenty of fuel filters now.
A part number would be awesome. I'm ready to just buy one.
I'm dealing with the same crap trying to get my engine install kit... I'm about fed up with the service I'm getting from F5.
theidlemind
04-26-2023, 07:22 PM
Been offline for a few days, THANK YOU EVERYONE for the help!!
I'm going to take MasterTech up on his offer so I can install the waterfall and finish up the interior.
dbest
SpeedStar build.
Mastertech5
04-26-2023, 10:52 PM
Been offline for a few days, THANK YOU EVERYONE for the help!!
I'm going to take MasterTech up on his offer so I can install the waterfall and finish up the interior.
dbest
SpeedStar build.
Return PM sent.