Wiring stock Ford ignition switch with RF harness

[D-Dubya]

Like others, I decided to use a different ignition switch, bezel and cylinder for my MKIV build as I was not that happy with the appearance of the FFR supplied switch. That said, I purchased a stock 66 Mustang ignition switch, bezel and cylinder from CJ Pony but need help with the wiring. I have a small block 347 with Sniper EFI from BluePrint Engines and using the RF harness supplied with the kit. The back of the Ford switch is very different from the FFR switch and the terminals are not labeled. Does anyone have a diagram of how to wire the RF harness to the stock Ford ignition switch?

Thanks for your help. The wiring is the part of the build I am the least knowledgeable about so get ready for a lot of questions.

Thanks,
Doug

[toadster]

check on TedG's build he did a mustang switch :)

https://thefactoryfiveforum.com/showthread.php?42435-Ted-G-s-427-Cobra-Build-10333&p=511970&viewfull=1#post511970