Upper steering shaft inventory question

[smu96]

What box did your upper steering shaft come in? I cannot find mine. It's definitely not in Box 1 with the rest of the steering parts. I did a thorough inventory upon kit delivery and made note of everything that was backordered, but it isn't on my b/o list. I have gone bacj through the packing lists several times and don't see it listed. Thanks for your help.

[SteveWorth]

Mine was in box 1 listed under 13859 Upper Steering Shaft Parts - 13695 is the Upper Steering Shaft and 13860 1/4” Spring Washer (Kit date 2/4/23)

[haak60]

when you do inventory you should do it with the manual. i had stuff i did not receive i didnt even know i was suppose to get because it wasnt listed anywhere. i received my kit last august and they have since redid their inventory system, dont know if its any better or not

[Sarcasticshrub]

I was missing mine. Not on the POL, not in any box or inventory sheet, just missing. Emailed FFR to let them know. Of course, they will get one to me ASAP.

[mrglaeser]

OMG - I thought I was going Mad. I couldn't find mine today either took delivery in Feb. Did the inventory line by line. I also didn't have 1/2 x 4" bolts the manual called for. Just went out and bought them. I reviewed the packing list at least 5 times trying to figure out what box it was in and it wasn't listed for me either. Guess I'll email tomorrow.

Question. Did you get your steering boss? Mine came a month after the kit. I pulled it out today and holes in the boss don't line up with the steering wheel. If you got yours do the holes like up between the wheel and boss?

[michael everson]

The steering wheel only mounts in one orientation. Keep rotating it until all the holes line up.
mike

[maclonchas]

I just received my kit last week and the box 1 had the following related to Steering shaft parts

11072 Steering Bearings
12460 1" Flange Bearing. 1 each
10577 3/4" ID Pillow Block 1 each

13859 Upper Steering Shaft Parts
13695 Upper Steering Shaft 1 each
13860 1/4" Spring Washers 2 each

16752 Complete Kit Steering Shaft Parts
10937 Cotter Pin 2 each
15514 2.45" Spacer 2 each
16584 18.375" x 3/4" DD Shaft 1 each
15839 3/4"-36 spline x3/4" DD U-Joint 1 each
15840 1" FF U-Joint x 3/4" DD U-Joint 1 each
12642 17" x 1" DD Tube 1 each
14657 Aluminum Center Section 1 each
11008 Steering Wheel Boss 1 each

Hope this helps.

Bill

[mrglaeser]

The steering wheel only mounts in one orientation. Keep rotating it until all the holes line up.
mike

Mike - You are correct. I did not have it clocked correctly. The boss does fit the wheel. Though I'm going to machine it out a quick release anyway.

https://giphy.com/embed/TwtXMS5EnKDBK (https://giphy.com/embed/TwtXMS5EnKDBK)

[AC Bill]

Do they not come with Belville washers any longer, as part of the steering column components?