Remote clutch/brake reservoirs to wilwood master cylinders

[hennessyVV]

Just received my jamar performance triple reservoir for my front/rear brakes and clutch m/c. My kit has not arrived yet, but I am in the process of buying odds and ends while I wait. Quick question:

Which fitting should i get if i am connecting the remote reservoir to the wilwood master cylinders?
90degree 1/8in. NPT to 3/8in. hose barb
or
90degree 1/8in NPT to 1/4in hose barb

I've been reading and doing research and have noticed some different answers.



Thank you in advance.

[runamuk]

I would wait until you start putting it together, your setup might be a little different.

[MB750]

I didn't need to buy fittings, FFR came with a hose barb for the reservoir, and the MC had hose barbs as well.

Well, technically the reservoir had a straight 1/8" NPT that a hose barb threaded into.

Regarding the angle, depends on where you mount it. Mine's on the drivers side upper body rail right in front of the footbox so I went with the straight fittings the kit came with.