info on hydraulic clutch - where to source and what kind

[Honest Ernie]

Hello everyone. Build #10314

I am looking for information and advice from someone who has installed a hydraulic clutch into their cobra. I have the Wilwood master cylinder in place in the pedal box but do not have anything else required. The linkage and the slave cylinder and connecting parts for the clutch attachments. Could some please let me know where they obtained their parts and what is needed beyond the master cylinder.

Thank you
Honest Ernie

[65 Cobra Dude]

HE, Mike Forte sells the external slave hydraulic clutch which I have used on many cars and will continue to use. He’s a vendor here.

Henry

[MB750]

Since you have the master cylinder already:

https://www.dazecars.com/dazed/test.html#3

I bought his 94-95 Mustang kit, since my donor was a 1995. Just had to add a 72" SS braided -3AN line and a few small fittings on each end.

[Blitzboy54]

Since you have the master cylinder already:

https://www.dazecars.com/dazed/test.html#3

I bought his 94-95 Mustang kit, since my donor was a 1995. Just had to add a 72" SS braided -3AN line and a few small fittings on each end.

This is what I used as well

[Jim Wehr]

Mike Forte

[wallace18]

If you have a T5 or a tko/tkx , Mike Forte is the man, IMO.