Jeff_J.
02-23-2023, 12:11 PM
I'm hoping for a confirmation of what I found. I've been working on dash wiring for my roadster & ran across what I think is a mistake. The wire and connector from the fuel gauge does not line up with the pinning on the RF harness connector. The connectors fit but the green wire does not mate with a corresponding pin on the gauge connector. (see picture). The gauge manufacturer (speed Hut) includes a fuel sender cable which they suggest be used to connect the tank sending unit to the gauge, the wires line up on their connector. It's easy to adjust the pin on the RF harness if in fact that is the issue. I figured I'd double check before starting the de-pinning the connector, in case I have something wrong all together. 180484 Hope someone can provide some experience here. Thx Jeff_J